BMW Z4 M40i G29 2022 Portimao Blue technical data

THE Z4

BMW Z4 M40i ROADSTER: ENGINES & TECHNICAL DATA.

THE Z4BMW Z4 M40i ROADSTER: ENGINES & TECHNICAL DATA.

The key facts and figures for the BMW Z4 M40i Roadster at a glance:

Engines, consumption and CO2 emissions
Performance data such as displacement, kW/hp, torque and acceleration
Weight, dimensions, wheel and tyre sizes

BMW Z4 M40i ROADSTER: TECHNICAL DATA.

Select model

Total Powertrain [1]
Powertrain type	Petrol
Power in kW (hp)	250 (340)
Torque in Nm	500
Transmission	8-speed, automatic
Drivetrain	Rear-wheel drive

TwinPower Turbo internal combustion engine [1]
Cylinders	6
Displacement in cm3	2998
Nominal power in kW (hp)/1/min	250 (340)/5000-6500
Nominal torque in Nm/1/min	500/1600-4500

Performance
Acceleration 0–100 km/h in s	4.5
Maximum speed in km/h	250

Fuel economy/CO2 emissions [1][2]
Fuel consumption, combined WLTP in l/100 km	8.1-7.9
CO2 emissions, combined WLTP in g/km	184-179

Dimensions/weights
Length/width/height in mm	4324/1864/1303
Wheelbase in mm	2470
Curb weight in kg [3]	1640
Luggage capacity in l	281
Fuel capacity in l	52

Fuel consumption and CO2 emissions.

BMW Z4 M40i Roadster:
Fuel consumption in l/100 km (combined): 8.0–7.8
CO2 emissions in g/km (combined): 182–177

Official figures for fuel consumption, CO2 emissions, electricity consumption and electric range were determined in accordance with the prescribed measurement procedure and comply with Regulation (EU) 715/2007 as amended. WLTP figures take into account any optional equipment in the case of ranges. or newly type-tested vehicles since 01.01.2021, the official data no longer exist according to NEDC, but only according to WLTP. For more information on the WLTP and NEDC measurement procedures, see www.bmw.de/wltp

BMW Z4 M40i Roadster:
Fuel consumption in l/100 km (combined): 8.1–7.9
CO2 emissions in g/km (combined): 184–179

Official data for fuel consumption, CO2 emissions, power consumption and electric range was determined in accordance with the prescribed measuring procedure and corresponds to European Regulation (EC) 715/2007 in the applicable version. For ranges, data determined as per WLTP takes into account any optional equipment (available on the German market in this case). For vehicles that have been newly type approved since 1 January 2021, only the official data according to WLTP exists. In addition, NEDC values are deleted from the certificates of conformity as of 1 January 2023 by EC regulation 2022/195.

For more information about NEDC and WLTP measuring procedures visit www.bmw.com/wltp

Further information about fuel consumption and official model-specific CO2 emissions of new passenger cars can be found in the "Guideline for fuel consumption, CO2 emissions and electric power consumption for new passenger cars", available free of charge at all points of sale, at the Deutsche Automobil Treuhand GmbH (DAT), Hellmuth-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen, Germany, and under https://www.dat.de/co2/.

The figures for performance, consumption and CO2 emissions refer to vehicles with standard transmission. Values in square brackets apply to vehicles with automatic transmission.

(1) Performance data of petrol engines apply to vehicles using RON 98 fuel. Fuel consumption data apply to vehicles using reference fuels in accordance with EU Regulation 715/2007. Unleaded RON 91 and higher with a maximum ethanol content of 10% (E10) may also be used. BMW recommends RON 95 fuel. For high-performance automobiles, BMW recommends RON 98 fuel.

(2) Official data for fuel consumption, CO2 emissions, power consumption and electric range was determined in accordance with the prescribed measuring procedure and corresponds to European Regulation (EC) 715/2007 in the applicable version. For ranges, data determined as per WLTP takes into account any optional equipment (available on the German market in this case). For vehicles that have been newly type approved since 1 January 2021, only the official data according to WLTP exists. In addition, NEDC values are deleted from the certificates of conformity as of 1 January 2023 by EC regulation 2022/195.

For more information about NEDC and WLTP measuring procedures visit www.bmw.com/wltp

Further information about fuel consumption and official model-specific CO2 emissions of new passenger cars can be found in the "Guideline for fuel consumption, CO2 emissions and electric power consumption for new passenger cars", available free of charge at all points of sale, at the Deutsche Automobil Treuhand GmbH (DAT), Hellmuth-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen, Germany, and under https://www.dat.de/co2/.

(3) The EC unladen weight refers to a vehicle with standard equipment and does not include any optional extras. The unladen weight includes a 90% full tank and a driver weight of 75 kg. Optional equipment may affect the weight of the vehicle, the payload and the top speed if the selected equipment has an impact on the vehicle's aerodynamics.

The figures for performance, consumption and CO2 emissions refer to vehicles with standard transmission.

(1) Performance data of petrol engines apply to vehicles using RON 98 fuel. Fuel consumption data apply to vehicles using reference fuels in accordance with EU Regulation 715/2007. Unleaded RON 91 and higher with a maximum ethanol content of 10% (E10) may also be used. BMW recommends RON 95 fuel. For high-performance automobiles, BMW recommends RON 98 fuel.

(2) The values of fuel consumptions, CO2 emissions and energy consumptions shown were determined according to the European Regulation (EC) 715/2007 in the version applicable at the time of type approval. The figures refer to a vehicle with basic configuration in Germany and the range shown considers optional equipment and the different size of wheels and tires available on the selected model.

The CO2 efficiency specifications are determined according to Directive 1999/94/EC and the European Regulation in its current version applicable. The values shown are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle for the classification.

For further information about the official fuel consumption and the specific CO2 emission of new passenger cars can be taken out of the „handbook of fuel consumption, the CO2 emission and power consumption of new passenger cars“, which is available at all selling points and at https://www.dat.de/angebote/verlagsprodukte/leitfaden-kraftstoffverbrauch.html.

(3) The EC unladen weight refers to a vehicle with standard equipment and does not include any optional extras. The unladen weight includes a 90% full tank and a driver weight of 75 kg. Optional equipment may affect the weight of the vehicle, the payload and the top speed if the selected equipment has an impact on the vehicle's aerodynamics.

(4) Provisional figures; any missing figures were unavailable at the time of publication.